Star Trek Metal Nozzle Kit, Greg Jein, Brass Sled, Brass Slotted Tube Kit

In general: all parts are shipped with the machine finish as shown in the LISTING PHOTOS. Final finishing is by the Buyer (prop maker) and may include; polishing, graining, distressing, acid washes, electroplating, and other treatments as selected and executed by the Buyer. Most parts will have some cosmetic blemishes that the Buyer may/may-not want to remove or enhance. Thank You. Star Trek Three-Part metal nozzle KIT for phaser projects Parts are (1) Spinner Hero Grade Phaser Nozzle, (2) Brass P1 Sled, (3) Slotted Brass Emitter Tube. See listing photos for detailed information. NEED FIBERGLASS SHELLS PASTE LINK AND VISIT: EBAY SELLER "forestlakeip" (https://www.ebay.com/itm/255817798884?hash=item3b8fedd4e4:g:lB0AAOSwL0tiR9x5) MORE FIBERGLASS PHASER SHELLS (https://www.ebay.com/usr/forestlakeip?_trksid=p2047675.m3561.l2559) This is a recreation of Greg Jein-owned Hero nozzle, P1 Sled, and Slotted Brass Emitter Tube: as seen on display all over the internet. See my photos. Do some educational Star Trek web surfing. This recreation was carefully copied paying special attention to everything.Engineered & re-engineered by me to allow a quick retrofit to, fiberglass heroes, Art Asylum P2 TOS shells or any shell you like.P2 Shells will require modification and fitting of the nozzle to shell.The aluminum is NOT ANODIZED.Acrylic Emitter Fitting: Custom by you. 5/16 inch(es) nominal material can be used (just a suggestion). 1. NO ACRYLIC EMITTER INCLUDED. NO PHASERS INCLUDED. 2. Phaser Installed Photos & OTHER ASSEMBLED PHOTOS for reference and information purpose only. 3. EACH SET INCLUDES: ONE THREE-PART NOZZLE, ONE BRASS SLED, ONE SLOTTED BRASS ACRYLIC EMITTER PUSHER TUBE. ONE EACH, ONE-SET, GOT IT ? 4. ALL THREE PARTS IN THE SET ARE PRE-DRILLED AND PRE-SLOTTED JUST AS SHOWN IN LISTING PHOTOGRAPHS. 5. PARTS ARE ENGINEERED TO DROP-IN-PLACE FOR EASE OF USE. 6. THIS SET CAN BE A GREAT TIME SAVER FOR ANY BUILDER AND THE PARTS ARE SUPER ACCURATE. 7. THE BRASS SLED AND TUBE ARE ADJUSTABLE TO YOUR REQUIRED EXACT ANGLES AND BUILDING DIMENSIONS. 8. THE LENGTH OF THE TUBE EXTENDING OUT THE BACK OF THE NOZZLE CAN BE CUT/FILED/SANDED TO MEET YOUR SPECIFIC NEEDS ALUMINUM NOZZLE SIZE & DETAILS DIMENSIONS; The standard Trek nominal: 1-3/16 inch(es) diameter x 1 inch(es) long exposed decorative part. Overall part is nominal 1-7/8 inch(es). Nozzle Emitter Thru Hole Size: nominal 0.320 inch(es) (5/16 inch(es)) diameter I.D. x 1-3/4 inch(es) O.A. depth x projecting rear tube 7/8 inch(es) long & 0.438 inch(es) (7/16 inch(es)) O.D. Side Turn Cradle Pilot Hole Location: 3/8 inch(es)-back from nozzle base. Nozzle Has Three part design with spinner knurl section. No Ratchet effect, true to the HMS Roddenberry Prop spinner mechanism. Nozzle medium size front radius matches Greg Jein Hero. Perfect knurl alignment thanks to new tooling. This item is exquisite in every way. Entirely machined and end milled, the knurl is not extruded aluminum !! D Stines quality or your money back. Material of Nozzle is: Finished 6063-T5 Aluminum Alloy (British HE9), not hard anodized: ready for traditional light bulb installation. This three part NOZZLE design (Roddenberry Spinner/Greg Jein type mechanics) extensively prototyped, AND INCLUDES TWO PART BRASS P1 SLED. BRASS SLED TUBE SIZE & DETAILS Tube about 13/16 inch(es) long x 19/64 inch(es) diameter (well fit to aluminum nozzle thru hole) with a 7/32 inch(es) thru-hole for rice light wires. Milled Slot in a tube to accept the brass sled. The wall thickness of tube is about 1/16 inch(es) to allow for a solid solder joint should you choose (not a thin brass tube, a lathe machined part) Slot is end-milled into tube about 1/4 inch(es) and can be easily filed deeper if desired, or opposite end can be filed-shorter. Again, an adjustable design but ready to Drop-In to an aluminum nozzle. NEED MORE ?? MESSAGE ME ON EBAY... Warranty & Service Information: Hate it? Return it in 30 days following eBay Policy. SLED AND ASSEMBLY SPECIFICATION INFORMATION; Centerline of nozzle assembly/emitter to sled Radius Shape cradle bottom is 0.4379 inch(es). also (7/16 inch(es), also can be called Cradle Bottom of Radius aligns with top of exterior nozzle. Overall sled part is about 23/32 high x 1/2 inch(es) wide x 5/16 inch(es) overall deep with a 3/64 inch(es) wire hole ready for a wire!! Wire hole will support loads of 100 Lb + with ease, and you have a warranty !! The Hole location on the sled is identical to the old J. Long P2 Builds. The sled has a 5/32 inch(es) radius cradle that is engineered to catch the front of a Phaser and allow a 1/4 inch(es) emitter to sit in it quite well. The sled is brass so it can be easily shaped and filed to suit your needs. The sled can epoxy/solder to the loose brass emitter tube either High or Low to suit your design needs. The sled can epoxy/solder to the loose brass emitter tube at a forward or backward angle as well. A fully adjustable design, but ready to Drop-In. I have received feedback that my parts had no oily residue on them, BE ADVISED: Coolant-Residue / Thin-Oil-Film on Phaser Metal parts & Phaser Metal Parts Kits can not be seen nor felt with the hand, however, the residue is there and it is important to follow my suggestion that all parts be washed in Dawn dish-washing soap (or a similar detergent) to be certain there is on oily residue that could interfere with paint-bonding and/or adhesive bonding. PASTE LINK FOR; EXPLODED PHASER LSR 12mm SLIDESHOW; YOUTUBE VIDEO (https://www.youtube.com/watch?v=qGj03TyV1dA) PASTE LINK FOR; AA/DS PHASER-LSR 12mm HOW-TO; YOUTUBE VIDEO (https://www.youtube.com/watch?v=e3eY0ImkO7Q&t=1192s) PASTE LINK FOR; TOS-PHASER FIN FINISHING; YOUTUBE VIDEO (https://www.youtube.com/watch?v=AiPjLhyzJzo) PASTE LINK FOR; TOS-PHASER SIDE-RAIL FINISHING; YOUTUBE VIDEO (https://www.youtube.com/watch?v=Mm0_nCrydZo&t=20s) METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as "Dawn" or "Palmolive" to insure a clean part. CLICK BELOW FOR: MY YouTube CHANNEL Some Star Trek Prop History For Inquiring Minds: Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories) Mr. Bob Stone was Star Trek's machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960's) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend Robert Archer (VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960's the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. James Ruggs (b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade's, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart. NOTICE © and TM 2021. jonpaultrek2012 ® is a registered trademark with the United States Patent and Trademark Office Reg. No.6,431,925 The products sold here are all jonpaultrek2012™® & © 2023 works, are all; custom manufactured & engineered. Jonpaultrek2012 And related marks and logos are trademarks of Jonpaultrek2012 LLC. All Rights are hereby explicitly Reserved. United States Patent & Trademark Office Reg. No. 6,431,925.The jonpaultrek2012 company Supports the right to free expression and the value of the copyright. The purpose of the copyright is to encourage writers, filmmakers and artists to produce the creative works that enrich our culture. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author's Intellectual Property. if you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission. All new products sold on this website are produced under license From: jonpaultrek2012™® LLC, Florida corporation, located in the United States of America.