SHIP 2 FOR THE SAME POSTAGE COST AS 1!! SHIP 8 FOR 6.65 OR LESS ANYWHERE IN THE USA!! These paints are comparable to Model Car World Enamel Colors and Consistency TRU-COLOR PAINT PRODUCES A LARGE NUMBER OF AUTOMOTIVE AND TRUCK PAINT COLORS IN MANY DIFFERENT CATEGORIES. THESE ARE HIGH-GLOSS SINGLE COLOR PAINTS WHICH INCLUDES KANDIES AS WELL, METALLIC AND PEARLESCENT PAINTS. THE LATTER TYPE INCLUDES METALLIC KANDIES AS WELL. ALL OF THESE PAINTS ARE AIR BRUSH READY AND WE RECOMMEND APPLYING THEM AT 28-35 PSI USING A MEDIUM (.5 MM) TIP. TRU-COLOR PAINT IS A SOLVENT BASED PAINT WITH AN ACRYLIC POLYMER USED AS THE BINDING AGENT WHICH ADHERES VERY WELL TO PLASTIC OR METAL MODELS, WHEN THOSE MODELS ARE PROPERLY PREPARED. THE PIGMENTS AND/OR DYES USED TO PRODUCE THE CORRECT COLORS ARE VERY FINELY GROUND SO THAT THEY DO NOT CLOG AIR-BRUSHES. THE TCP-500 SERIES ARE HIGH GLOSS PAINTS DESIGNED TO GIVE THAT “SHOW ROOM FRESH” APPEARANCE ON YOUR MODEL AND/OR RC CAR OR TRUCK. They are Airbrush Ready! THE TCP-600 AND 700 SERIES ARE ALSO HIGH GLOSS AND PRODUCE A “SHIMMER” DUE TO THE METALLIC OR PEARLESCENT PARTICLES USED IN THE MANUFACTURE OF THE PAINT WHEN VIEWED AT AN ANGLE UNDER STRONG LIGHT OR OUTDOORS. WHEN USING A KANDY (WHICH ARE TRANSPARENT COLORS), THEY SHOULD BE APPLIED OVER A SILVER (TCP-077) OR BRASS (TCP-288) PAINT TO HAVE THE COLOR “POP”. THIS CAUSES THE PAINT TO APPEAR LIQUID AND HAVING DEPTH. They are Airbrush Ready! FOR RC BODIES APPLY THE KANDY COLOR FIRST AND THEN BACK THE COLOR WITH A METALLIC PAINT FOR BEST APPEARANCE. ALL OF THE AUTOMOBILE COLORS IN ALL SERIES CAN BE APPLIED TO RC (RADIO CONTROL) BODIES. THE PAINT WILL NOT CRACK OR CRAZE THE BODY AND ADHESION IS SUPERB, EVEN IF THE R/C CAR IS INVOLVED IN A CRASH. NOTE THAT WHEN USING A KANDY COLOR, BACK THE COLOR WITH SILVER (TCP-077) OR BRASS (TCP-287) TO MAKE THE KANDY “POP” ON THE VEHICLE. IT WILL GIVE YOUR MODEL ADDED APPEAL.
